NAD C388 Integrated Digital Amplifier

Description: Welcome to Surround Sounds – Saving the World from Bad Electronics Since 1997. We are a family-owned business located in Exton, PA, and have been providing high-quality audio and video gear to our customers for over two decades. As an authorized dealer of Sony, NAD, Krell, Totem, Monitor and more, we carry an extensive selection of their products and ensure the best deals for our customers. Our knowledgeable staff are available to assist you in finding the perfect audio and video solutions to suit your needs. If you have any questions or inquiries concerning our listings and inventory, let us know! The NAD C 368 is a stereo amp that delivers 150W per channel into 8 or 4 Ohms, with low distortion and high signal-to-noise ratio. It can connect to various digital, analog, and wireless sources, including Bluetooth A2DP with aptX for high-quality wireless streaming. It has a MM Phono input for your turntable, as well as analog line inputs and digital inputs (coaxial and optical). You can also use the preamp output to connect two pairs of speakers (A and B) or a subwoofer. The headphone amplifier has a high output voltage and low output impedance, making it compatible with most headphones. The NAD C 368 also has two MDC slots that let you upgrade it with additional features, such as network streaming, USB input, HDMI input/output, and more. You can control the amp with the IR remote or the smartphone app, and also integrate it with third-party control systems like Control4, Crestron, RTI, URC, AMX, Savant, Elan. The NAD C 368 has a sophisticated design that ensures optimal performance for all your music sources. Product highlights: Features: 150W x 2 Continuous power into 8 or 4 Ohms Bluetooth A2DP with aptX supported MM Phono input Analogue line inputs USB port for service purposes SPDIF coax and optical inputs Speaker A, Speaker B Preamp/Subwoofer out Headphone amplifier MDC Slots for future upgrades IR remote Smartphone Control App 12V Trigger in/out IR in/out RS-232 Serial port for control Control4, Crestron, RTI, URC, AMX, Savant, Elan certified Preamplifier Line Input, Pre Out THD (20Hz-20kHz) <0.005% at 2V out Signal/Noise Ratio >106dB (IHF; A-weighted, ref. 500mV out, unity gain) Channel Separation >80dB (1kHz); >70dB (10kHz) Input Impedance (R and C) 22 kilohm + 100pF Maximum Input Signal >4.5Vrms (ref. 0.1% THD) Output Impedance Source Z + 240 Ohm Input Sensitivity 93mV (ref. 500mV out, Volume maximum) Frequency Response ±0.03dB (20Hz-20kHz) Maximum voltage output – IHF load >4.5V (ref. 0.1% THD) Tone Controls Treble: ±7.0dB at 20kHz Bass: ±7.0dB at 60Hz Balance: -10dB Phono Input, Pre Out THD (20Hz-20kHz) <0.01% at 2V out Signal to Noise Ratio >84dB (200 Ohm source; A-weighted, ref. 500mV out) >76dB (MM cartridge source, IHF; A-weighted, ref. 500mV out) Input Sensitivity 1.44mV (ref. 500mV out, Volume maximum) Frequency Response ±0.3dB (20Hz-20kHz) Maximum Input Signal at 1kHz >80mVrms (ref. 0.1% THD) Line Input, Headphone Out THD (20Hz-20kHz) <0.005% at 1V out Signal/Noise Ratio >110dB (32 Ohm loads; A-weighted, ref. 2V out, unity gain) Frequency Response ±0.3dB (20Hz-20kHz) Channel Separation >60dB at 1kHz Output Impedance 6 Ohms General Specifications Continuous output Power into 4 Ohms and 8 Ohms (Stereo) 150W (at rated THD, 20-20kHz, both channels driven) IHF Dynamic Power 8 Ohm: 250W 4 Ohm: 350W 2 Ohm: 400W THD (20Hz-20kHz) <0.02% (250mW to 150W, 8 Ohm and 4 Ohm) Signal/Noise Ratio 95dB (A-weighted, 500mV input ref. 1W out in 8 Ohm) Clipping Power 160W (at 1kHz 0.1% THD) Peak Output Current 20A (in 1 Ohm, 1ms) Damping Factor 150 (ref. 8 Ohm, 20Hz and 6.5kHz) Frequency Response ±0.3dB (10Hz-65kHz)

Price: 1199 USD

Location: Exton, Pennsylvania

End Time: 2024-02-01T20:36:43.000Z

Shipping Cost: 5 USD